New to dart frogs, first vivarium!

[Keister]

The big brom in the middle looks out of place. If it were me i would move it to one of the ends of the tanl in the back corner or take it out completely. Just my opinion. Its the first thing that catches my eye and having it in the middle and upfront like that just seems out of balance to me

Sent from my GT-N8013 using Tapatalk HD

Ok I can do that! I can move it to the right side on the background. Thanks for the advise! Well I just hooked up my mistking and the whole thing is defective the pump leaks from a fitting and the zipdrip valve doesn't prevent the mist heads from dripping at all and the wiring is all messed up. The pump doesn't turn on unless you hold the connector from the zipdrip valve to the pump connector and you have to jiggle the wires and the pump just cuts in and out. Even when you by pass the zipdrip valve you have to do the same thing with the connectors only to receive the same result. I emailed mistking and hope they will correct this problem and I have faith that they will. It is a really nice pump and set up but I think this one may just be a lemon at least I hope so anyway! I will give and update on what I hear back from them! Anyone else ever have anything like this happen?

[J Teezy]

Ok I can do that! I can move it to the right side on the background. Thanks for the advise! Well I just hooked up my mistking and the whole thing is defective the pump leaks from a fitting and the zipdrip valve doesn't prevent the mist heads from dripping at all and the wiring is all messed up. The pump doesn't turn on unless you hold the connector from the zipdrip valve to the pump connector and you have to jiggle the wires and the pump just cuts in and out. Even when you by pass the zipdrip valve you have to do the same thing with the connectors only to receive the same result. I emailed mistking and hope they will correct this problem and I have faith that they will. It is a really nice pump and set up but I think this one may just be a lemon at least I hope so anyway! I will give and update on what I hear back from them! Anyone else ever have anything like this happen?

When i first got my mistking (a year ago about) i had some issues. I had a leak at the output of the pump where water would spray out from the fitting where it connected to the main pump body and also the same thing on the zip drip valve with a leak spray at one of its fittings. Marty did some trouble shooting with me of having me wrap the fitting threads in teflon tape and reattach them. That didn't work so Marty sent me his UPS number for me to send back my pump and zip drip at his expense and he sent me out a new pump and zip drip that same day that he personally tested himself to make sure it was leak free. Stuff like this happens, no products are made to 100% perfection everytime. Marty's thoughts were that maybe the torque setting on his tool that they use to attach the fittings go messed up and may have stripped out the fitting a tiny bit causing the spray leaks. I never hesitate to buy any misting products from Marty because he stands behind his product 110%. He is one of the few people that make products in the business that I never hesitate to talk with. Same goes for Tony at Ecozone Vivarium Controllers, Josh's Frogs is pretty good as well, Mike Rizzo of glassboxtropicals, and Todd at lightyourreptiles. You'll love that Mistking once you get it up and running at full steam. I just recently changed out my standard nozzles to the premiums for the less bulky look. Should have went with the from the start!

[Keister]

When i first got my mistking (a year ago about) i had some issues. I had a leak at the output of the pump where water would spray out from the fitting where it connected to the main pump body and also the same thing on the zip drip valve with a leak spray at one of its fittings. Marty did some trouble shooting with me of having me wrap the fitting threads in teflon tape and reattach them. That didn't work so Marty sent me his UPS number for me to send back my pump and zip drip at his expense and he sent me out a new pump and zip drip that same day that he personally tested himself to make sure it was leak free. Stuff like this happens, no products are made to 100% perfection everytime. Marty's thoughts were that maybe the torque setting on his tool that they use to attach the fittings go messed up and may have stripped out the fitting a tiny bit causing the spray leaks. I never hesitate to buy any misting products from Marty because he stands behind his product 110%. He is one of the few people that make products in the business that I never hesitate to talk with. Same goes for Tony at Ecozone Vivarium Controllers, Josh's Frogs is pretty good as well, Mike Rizzo of glassboxtropicals, and Todd at lightyourreptiles. You'll love that Mistking once you get it up and running at full steam. I just recently changed out my standard nozzles to the premiums for the less bulky look. Should have went with the from the start!

Yes he seems like a great guy! I look forward to giving him more business in the future! The wiring is the main issue with my pump and that requires a complete redo so he is just sending me a new pump and zipdrip valve! Like I said before excellent customer service!

[Keister]

A little update for everyone on the mistking, Marty not only sent me a new pump and zip drip cable but he personally tested it before he sent it to me to make sure it worked! I can't say enough a out how great their customer service is!

[J Teezy]

gotta love Marty, great customer service, I never hesitate to buy anything from him. Loving the new premium mist nozzles that I got last week over the standard ones i had. Much more slimmer and love the silver heads.

[Keister]

Well I got three green and bronze last night from a local friend and the one is blue and bronze who has quickly become my favorite so far! Let me know what you think!