20 Gallon Vertical Build Journal

[DonLisk]

I know what you mean John. I see so many that I wish to grab design ideas from and they never come out like the original I was thinking of.

[SludgeMunkey]

Looks great Don! A quick suggestion, before you get too far along with the build, you may want to poke a meat skewer into the thicker portions of the foam to vent gasses and help it cure at the core. I found that the foam surface cures quickly, but stays pretty gooshy and out gasses for weeks otherwise.

I can't wait to see the finished product so I can steal your ideas!

[DonLisk]

Looks great Don! A quick suggestion, before you get too far along with the build, you may want to poke a meat skewer into the thicker portions of the foam to vent gasses and help it cure at the core. I found that the foam surface cures quickly, but stays pretty gooshy and out gasses for weeks otherwise.

I can't wait to see the finished product so I can steal your ideas!

Thanks. I'll do that tonight for something to do since I can't work on much more until I have glass and the smell out.
I can't wait to get the glass cut this Tuesday so I can start working on the front.

[Voltage]

Don, i'm jealos! Inspiring. Now I know what i'm gonna get for my b-day, a 20H and supplies! How did you make those pots?! (sorry if I missed that) they have that cool cork look to them. The only thing I would change is that flattish piece of driftwood you put in would look better if it was cork, or maybe it looks funky because it's dry. Guess we'll have to wait. The shrinking will only get worse, sorry to tell you On my tank it started out as a no problem shove some peat/silicone in, but it just kept getting worse and worse until it just came off. Hope this doesn't happen like it did for me! I have one other quick question. What are the dimensions of a 20H? Are they the same as a 10 but just taller? Thanks.

[DonLisk]

Don, i'm jealos! Inspiring. Now I know what i'm gonna get for my b-day, a 20H and supplies! How did you make those pots?! (sorry if I missed that) they have that cool cork look to them. The only thing I would change is that flattish piece of driftwood you put in would look better if it was cork, or maybe it looks funky because it's dry. Guess we'll have to wait. The shrinking will only get worse, sorry to tell you On my tank it started out as a no problem shove some peat/silicone in, but it just kept getting worse and worse until it just came off. Hope this doesn't happen like it did for me! I have one other quick question. What are the dimensions of a 20H? Are they the same as a 10 but just taller? Thanks.

The dimensions are 24 1/4L x 12 1/2W x 16 3/4H ... not sure what a 10 gallon is off hand.
As for the pots, these are from a single piece of cork round and I ensure the hole through the center of it is big enough to accept plants before I buy it.
When I put these in I either silicone to the glass or I shove it into the foam right after I apply the foam and then adust angle while its curing. I cut out the excess foam inside to make room for soil and the plant after it cures.

Once wet and humid in the viv, the wood should stay pretty wet looking. 1st time using this wood so we'll see.

[Voltage]

The dimensions are 24 1/4L x 12 1/2W x 16 3/4H ... not sure what a 10 gallon is off hand.
As for the pots, these are from a single piece of cork round and I ensure the hole through the center of it is big enough to accept plants before I buy it.
When I put these in I either silicone to the glass or I shove it into the foam right after I apply the foam and then adust angle while its curing. I cut out the excess foam inside to make room for soil and the plant after it cures.

Once wet and humid in the viv, the wood should stay pretty wet looking. 1st time using this wood so we'll see.

Thanks! It's a bit longer (4 inches) than a 10 gallon and quite a bit taller as well as deeper, so I guess i'll be better of not using a 10 as a substitute for a 20H. I was about to ask that since you used cork rounds, wouldn't GS fill up the pots from the bottom. What do you use to carve it? I can see having a hard time getting a knife in a pot to carve dense foam. Sorry for all the questions Don.

[LilyPad]

Fantastic!! It's really looking great!