I'm very interested in using some sturdy freshwater driftwood for a potential vivarium. Normally, I wouldn't try it, but I now have access to an autoclave--which should be able to get rid of most if not all problematic hitchhikers. Does anyone have a suggestion on how long/how hot to set the machine at for driftwood? I also have a nice piece of Mopani I'd like to use, as well. I've used it in a turtle tank before, so that will need autoclaving too. Would that have the same time/heat requirements as the regular driftwood?
Thanks in advance!
Some pest control companies actually use heaters to warm an entire home or other building to high temps for several hours. The length of time depends on the temperature maintained and how long it's estimated it will take to bring all the framing of the building to that temperature. Certainly 140F till you are sure that's the internal temp of the wood should be enough for most pest and bacteria.
You might google for "Termites heat eradication" and look at some of the sites. Might get some useful info.
Thank you very much for the information! I was thinking more along the lines of microbial pathogens, but the heat/lethality chart for termites was fantastic too.
That's why I thought 140F would be sufficient. Most pathogens will be killed at that temp. Certainly almost all will be dead by 160F-180F but the higher temp might damage your wood.
Wood found outside should be boiled until it is waterlogged and sinks to the bottom. I'm not sure if an autoclave would be safe? Max temps in standard ovens should not exceed 200f. Make sure you have a fire extinguisher near just in case Here is a great article by Sludgemunky on sterilizing wood for vivarium use: http://www.caudata.org/cc/articles/wood.shtml
I got a piece of ghost wood and a manzanita branch from them a while back! I hope you will post pics of your viv build!
The autoclave will give off a bit of pressure as well , of which might help those hard to get to areas.
I have never autoclaved wood, however.... so not sure?
I bake and then scrub it really well with a scrub brush.
Current Collection
Dendrobates leucomelas - standard morph
Dendrobates auratus “Costa Rican Green Black"
Dendrobates auratus "Pena Blanca"
Dendrobates tinctorius “New River”
Dendrobates tinctorius "Green Sipaliwini"
Dendrobates tinctorius “Powder Blue"
Dendrobates tinctorius "French Guiana Dwarf Cobalt"
Phyllobates terribilis “Mint”
Phyllobates terribilis "Orange"
Phyllobates bicolor "Uraba"
Oophaga pumilio "Black Jeans"
Oophaga pumilio "Isla Popa"
Oophaga pumilio "Bastimentos"
Oophaga pumilio “Mimbitimbi”
Oophaga pumilio "Rio Colubre"
Oophaga pumilio "Red Frog Beach”
Oophaga pumilio "Rio Branco"
Oophaga pumilio “Valle del Rey”
Oophaga pumilio "BriBri"
Oophaga pumilio "El Dorado"
Oophaga pumilio "Cristobal"
Oophaga pumilio "Rambala"
Oophaga “Vicentei” (blue)
Oophaga sylvatica "Paru"
Oophaga sylvatica "Pata Blanca"
Oophaga histrionica “Redhead”
Oophaga histrionica "Blue"
Oophaga lehmanni "Red"
Oophaga histrionica "Tado"
Ranitomeya variabilis "Southern"
Ranitomeya imitator "Varadero"
Ranitomeya sirensis "Lower Ucayali"
Ranitomeya vanzolinii
http://www.fernsfrogs.com
https://www.facebook.com/ferns.frogs
I soak my wood then bake in the oven at 225f for an hour. I keep an eye on the wood, but with it being wet the chances of it drying and bursting into flames is really low.
1.1.0 - Oophaga Pumilio 'Blue Jeans' (2014 Nicaragua Import)
1.1.0 - Oophaga Pumilio 'Chirique Grande' F1
1.1.0 - D. Tinctorius 'Citronella'
1.2.0 - D. Tinctorius 'Azureus'
0.0.2 - D. Tinctorius 'Sipaliwini'
0.0.2 - D. Tinctorius 'New River'
0.0.4 - D. Tinctorius 'Leucomelas'
0.0.4 - Terribilis 'Mint'
1.1.0 - R. Ventrimaculatus 'French Guiana'
Facebook - https://www.facebook.com/hashtagfrogs
Youtube - https://www.youtube.com/channel/UCgC...sEZiZQoT8sOuuw
There are currently 1 users browsing this thread. (0 members and 1 guests)