Heating Pad

[deranged chipmunk]

Normally, the side of the tank is the best place for a heating pad for a frog tank. The underside is not wise in case the frog burrows. Even if it's not a burrowing species, most heat pads don't get hot enough to heat the tank through the substrate. A ceramic heat emitter may be a better option for heating the tank.


Education is the most powerful weapon we can use to change the world ~ Nelson Mandela

[monster]

Hello, I read a care sheet on tomato frogs and it does seem that they bury themselves. So ya putting on the bottom may not be wise. Most of these burying frogs do this to cool themselves and to get out of the direct sunlight. So if it is on the bottom he may not be able to regulate his body temperature properly because he wont be able to cool when he buries himself, hopefully I said that properly. L.O.L So if your going to use a UTH you should place it on the side or the back, and a little tip if you have the small 10-20 gallon UTH don't open and bring it back and get the next size up. That small one isn't going to nothing for you, and the next size up will be to big for the side so put it on the back. I use 2 in the winter to keep my temps up and I have a small 10-20 on the end and a 30-40 on the back and they are placed so they almost touch. I don't know how cold it is were you live but you may only need the big one on the back, and I did this for my pacman frog. The warm end hits 84f, the middle sits at 80f and the far end is 78F and these are day time temps and then at night I dim the big UTH and everything drops about 3 degrees. This way he can move through out his tank during the day and night to were the temps make him more comfortable. Or you can go easy the route and get a Ceramic heat emitter or some lights. hope this helped abit.

[Yoda]

Well, I'm from cold Canada, as my flag says. I do have to say I don't know if the heat would go through the glass. Does that mean I have to take the sticker off because apparently that's not the best option, IDK. But I don't know if my heating pad will heat through the glass. If you could take pictures of how it looks and show me that would help me very much.

[Yoda]

and thanks by the way!

[monster]

hi, ya I guess I could of looked at the flag and figured out its pretty cold were you are more then likely. L.O.L Here is a picture of how my UTH's are setup for my pacman frog. There has is other plants that go in the bare end but I took them out for the picture. The big one in the back is hooked up to a dimmer and that's how I drop the temps at night.

[Yoda]

Sorry to ask since I don't know very much about heating pads but how does that make heat for your frog if it's on the side of the terrarium. Does that mean I have to take the sticker off of the heating pad.
.

[DigitalPunk]

Yes it will heat the terrarium. The Heating Pad will heat the glass and the glass will dissipate the heat into the terrarium and warm the tank. It is not my favorite way to heat a terrarium but it is a common way. To put the heating pad on the side you would want to peal the "cover" off the adhesive side and stick it to the tank.


I prefer to use Ceramic Heat emitters. It provides a radiant heat to the tank from above. It can heat the tank Day and night and produces no light. They last much longer than heat bulbs and heat the tank without zapping much of the humidity from it.