Foggers: the coolest looking way to increase humidity easily

[irThumper]

Would the foggers work in a room vs a tank? I have African violets in my frog room (well actually frogs in my African violet room, lol) and they need more humidity than I'm getting from open bowls of water. I just don't want to much moisture that it collects on the walls, 50-60% is plenty.

[LLLReptile]

Would the foggers work in a room vs a tank? I have African violets in my frog room (well actually frogs in my African violet room, lol) and they need more humidity than I'm getting from open bowls of water. I just don't want to much moisture that it collects on the walls, 50-60% is plenty.

You would need something bigger for a room. Walmart sells bigger humidifiers that work for rooms

[Louis Charles Bruckner]

LLLReptile is 100% on the spot on this.
Just remember to use distilled water as much as you can or the dissolved solids will foul up both the zoomed and the larger room model.

[irThumper]

Thanks guys!

[irThumper]

One more question, how would these foggers work with Reptariums?? Was thinking about putting my 29 gal tank into one of the large Reptariums and having taller plants growing up to the top Reptariums and Reptarium Accessories

[Louis Charles Bruckner]

Again I really love the combination of the Zoomed repti-fogger and the hygrotherm HT-10.
As you can program the humidity set point.

I would also say that the setup of the fogger is critical as is the placement of the temperature-hygrometer sensor of the HT-10

The best way to set up the fogger is very similar to how it looks on the front of the box in the picture.
With the exception of the angle of the output hose, the first 90° bend needs to be lower than the end of the output tube.
So that and condensation of water inside of the output tube will drip back into the fogger and not into the enclosure.
This will give you the best performance and water use efficiency and not drip water into the enclosure.

Now on the setup of the HT-10.
Placement of the control head and temperature-hygrometer sensor is critical.
You want to place it where you want the warmest area to be.
And not where it can get wet, as this will cause an error. and the sensor will have to be removed and dried out completely
before it will operate properly and if the water was dirty it may permanently damage the sensor.

So you don't want to place it near a water feature or a emitter of a misting system.
also you don't want to place it near a heat source, As it will cause short cycling of the heat system and
the heat will not be effective for the entire enclosure.

I have found that the halfway point on the side or back of the enclosure is optimal. For tree dwelling frogs
For ground dwelling frogs place the sensor closer to the bottom of the enclosure is better.

Now for the placement of the control head of the HT-10.
As it has a light sensor to control the night time temperature shift (1°F to 15°F from set Point)
The controller does not have a internal clock. :-(
So you have to place the control head facing the visible light source for the enclosure.

That posed a little problem for my pac man frog enclosure as it does not have a light at all.
I have a aquarium next to his enclosure and its light is on a 12 hr schedule on a timer.
So I made a little one white LED light that will plug into the timer of the aquarium
and I hot glued it to the front of the control head where the light sensor is
so the HT-10 would go into night mode when the aquarium lights go out.
And go back into day mode when the lights turned back on.

Hope this helps.

I know I haven't been around a lot on the forum lately
but I am the resident systems control engineer.
Just like Bill (deranged chipmunk) is the resident expert on enclosures of all types. (I'm not worthy of his greatness.) LOL
But if you ever need any "life support system" advice I will be glad to help.
Feel free to PM me.

One more question, how would these foggers work with Reptariums?? Was thinking about putting my 29 gal tank into one of the large Reptariums and having taller plants growing up to the top Reptariums and Reptarium Accessories

[Louis Charles Bruckner]

BTW the HT-10 can control larger foggers as long as they are ultrasonic and not heated or the older style of motorized type.
And you place the sensor in the area correctly.