Re: 20g Hex Build!
A couple reasons? Partly because I wasn't sure I would be able to provide a safe depth water area that could be climbed out of without sacrificing soil depth (so it could be sloped). And partly because, since the tank only opens from the top, I wanted it to be easy to clean if need be, and removable. I think it'll work out. We'll see.Originally Posted by deranged chipmunk
I have (slowly) been working on this build! I'm up to the coco fibre-ing stage, I need to post some pics!
EDIT: Pics.
Image 1
Adhering wood pieces, fan duct (corrugated plastic, silicone, fiberglass screen), and net cups with silicone (and a prayer - since some of the net cups were on vertical surfaces and I was impatient.) I cut two of the net cups in half, so they wouldn't stick out as much from the background, and to be able to add more (smaller) plants. One of the cups is in a corner, and so has almost the same inside dimensions as a full one. ^_^ I used pipe cleaner and paint stirrer sticks to help support the cups on their angled surfaces as they dried, and was able to stick everything in in one step.
Image 2
Everything stuck to the background! Yay!
Image 3
Balloons and straws before foaming.
Image 4
Foam applied (I actually had to do this in two steps, because of the 4 faces of the background - this is step one, in which I did the first 3 faces. Step 2, I unfortunately didn't get pics of because I got great stuff on my hands and couldn't pick up my phone. -_-)
Image 5
Totally foamed and dried.
Image 6
Foam trimmed back, using a razor blade and a lot of patience.
Image 7
Fit the main branch into place (this branch fits into a "socket" I made in the foam by wrapping the branch in plastic wrap during foaming and then pilling the wood and cling wrap out. Since the tank only opens at the top, this will allow me to take the big branch out in case of any major pruning, cleaning, etc I may need to do.) Same through process as the water dish here - this is my first tank and I want it to be easy to maintain and repair if needed. Technically the little branches are also removable, but they's small enough that I didn't need to make "sockets" for them, I just pushed them deeply into the foam.
Image 8 Image 9
All the branches placed! I can't wait to plant these they look so coooollll!!! The big branch is ghost wood, the smaller ones are manzanita.
Image 10
First face covered in coco fibre. I'm happy with how the net cup edge blends right into the big driftwood piece, and the shape overall. It looks more natural than I hoped, and the fan duct is hidden really well.
Image 11
Second and third face covered too! The mopani branch blends in well too (almost too well -_-) and adds some texture that I'm excited to see in the finished tank. I had to do touchups on this side, but nothing too major.
Image 12
Last face being covered. Then I can clean up the glass, and start adding leca and substrateeeee! I'm so excitedd! You can really see in this image why I had to do things in so many steps. I'm happy I decided to keep the design the way I had it through - two full height sides and two sloping down. It does limit the area from which you can see into the tank, but it also gives more to look AT when you do look in, and since I'm thinking of shy frogs who like to hide a lot (either the hyloxalus still, or some thumbnails) I think they'll appreciated the enclosed nature it provides. I also made some little caves using extra great stuff foamed over balloons and great stuff can caps, which I also siliconed and covered in fibre, but I don't have pics yet.
Sorry I haven't updated in forever, I was waiting for the right branches! All this building has happened in the past two weeks! Can't wait to have more to show you guys. I also started getting plants for this tank, some from Josh's Frogs, some from local reptile shows. There's probably too many to photograph. But you can never have too many plants. ^_^ So I'll share pics when I decide what goes in and what stays out (for other tanks, small terrariums, my own rainforest room, etc).
Reply With Quote
