Humidity issue

[Bast3rd]

So I have had my Pacman (whom I am tentatively naming Jeffery Lebowski) for about a month now. I am keeping him in a critter keeper until he is big enough for a 10gal. I have had problems keeping the humidity up by just spraying the tank a couple of times per day. Mostly It would be in the low to mid 50% after I would spray it would raise to maybe 70 but then an hour or so later it was down to the mid 50s again. So yesterday I went out and bought a zoomed fogger and linked it a humidity controller. and set it to 75%. By this morning my substrate and turned to soup. My little guy seems to like it. He burrowed into it in the night. I have been under the impression that the substrate should be damp not soaking. I thought about adding more substrate but I don't know it that would help. So what should I do? any advice?

Thanks.

[Bast3rd]

Oh yeah I for got to post a pic

[Mentat]

That wet substrate will become a bog and breeding place for bacteria (should be damp so it clumps on fist; but not drip water out). If fogger can't be adjusted; recommend not use it in the critter keeper. Also, if you use distilled water in fogger (recommended) that could create another problem for frog with distilled water soaked substrate.

You can actually prevent humidity loss by partially sealing the vents with aluminum foil taped to top. Try sealing back and sides first. If need to, you can seal up the front vents until 80-90 percent of all vents are sealed. That shout help maintain your humidity between misting .

[Bast3rd]

Thanks Mentat. I'll try that. I had thought in the past about trying to Cover the top to keep in the moisture. Also my fogger has a nob for intensity that I'll lower to see if that helps. By the way is your name a reference to Dune? I just finished reading that book last week and just started Dune Messiah.

[Hypnotic]

Looks like your probe is inside the substrate? Or what is that white thing? Are you taking measurements a little above ground?

[Bast3rd]

That is a temp probe. I also have one that is connected to the temp and humidity regulator hang though the top of the lid.

[Mentat]

Thanks Mentat. I'll try that. I had thought in the past about trying to Cover the top to keep in the moisture. Also my fogger has a nob for intensity that I'll lower to see if that helps. By the way is your name a reference to Dune? I just finished reading that book last week and just started Dune Messiah.

Yes, I use that name online in reference to the Dune Mentat's thought process; which I share, without using Sapho . Have read all the books on the SciFi series. The best were the originals by Frank Herbert. After Frank died, Brian Herbert and others continued the series; but the books are not the same .