Anyone tried a JungleBox Vertical Conversion kit?

[neongodzilla]

Hmmmmmm. There is an empty 10g in the garage. Looks like I may have a new project!

[velvety14u]

Im with Sludge , easier to build my own..........better custom fit too

[J Teezy]

i was looking at buying one of this for my 10 gallon test project but measured out my tanks rim dimensions to be 9 1/2" x 19 7/16" and the website says

NOTE: This kit is designed for aquariums with a rim opening of 9 3/4" x 19 1/2". Custom sizing available on request at an additional cost.

Johnny are you still around? Any way you could check the measurements of the kit? I've measured a few different brands of 10 gallons and haven't found one that has the rim dimensions they specify for the kit

[Kellbri]

I am also interested in converting tanks and having trouble with doing this, i am wondering if anyone know how to make them on there own? I am making one for a 20 long and a 55 gallon tanks

[DonLisk]

I am also interested in converting tanks and having trouble with doing this, i am wondering if anyone know how to make them on there own? I am making one for a 20 long and a 55 gallon tanks

http://www.frogforum.net/vivarium-te...d-journal.html

http://www.frogforum.net/vivarium-te...cal-build.html

[irThumper]

i was looking at buying one of this for my 10 gallon test project but measured out my tanks rim dimensions to be 9 1/2" x 19 7/16" and the website says

NOTE: This kit is designed for aquariums with a rim opening of 9 3/4" x 19 1/2". Custom sizing available on request at an additional cost.

Johnny are you still around? Any way you could check the measurements of the kit? I've measured a few different brands of 10 gallons and haven't found one that has the rim dimensions they specify for the kit

I know this is an old thread, but I would like to turn my 10 gal traditional tank into a vertical as well, and I measured mine at 19 3/8" (?) x 9 1/2"... is there any kind of kit that would work with that?? That's inside edge by the way, from the outter edges of the opening it's 20" x 10 1/8"....

[DigitalPunk]

irThumper - I converted a 10 gallon not long ago to a vertical tank.

Here is the thread - http://www.frogforum.net/vivarium-te...ical-tank.html

Post 14 I did a rough detail of how I did it. PM me with any questions.

[jarteta97]

I've used their 20H conversion kit. I'm a bit messy, so you should probably ask Paul if you need any guidelines

[irThumper]

Lol, thanks guys :P I'm not super techy-mechanically inclined or anything, but I hope I can figure it out!