My froggie

[Louis Charles Bruckner]

Ok finally got the battery and got the gauge working..I think its working..the humidity reading was a bit crazy..was reading 99% but I think that was maybe because of where I had originally placed it, near the water dish and the tank was sprayed a few hours earlier and still had a bit of condensation on the back panel. The temp was very worrying, it was reading 73°F so I have the heater on and monitoring it to reach about 82 that should also help bring the humidity from 84%, where is was reading after moving it away from the bowl, down a bit lower. And if they are offered food but don't eat should I offer again a bit later or wait until the next day, he/she is probably really stressed right now as I have been messing around in the habitat with the gauges n trying to get the stuff moved around a bit better to give him a bit more hiding space.

Yes you have to be careful not to mist the sensor, It will make it malfunction.
if you do get it wet just take it out and take out the battery and use a hairdryer set to cold air and dry it out for at least 5 min. and put the battery back in
and check the read out.

placement of the sensors is critical.
I place the sensors on the opposite side of the tank from the heat source and in the middle from the bottom and top of the tank.
this way you will have a temp gradient 9a hot side and a cool side and it will allow the frog to choose the temp it likes.