New Setup Delivered + Setup Is It Ok?

[DigitalPunk]

Looks good! I don't own any pac mans but I would say your little guy/gal will love it.

I wouldn't put the humidity sensor right above the water bowl, I would think you would get false Humidity readings from the evaporating water. but the hight off the ground looks perfect.

[reptifrog]

thanks mate, where you think I should put the sensor then?

[DigitalPunk]

I would personally put it at the same hight but in the middle of the terrarium. This will give you a more accurate measurement. I also put an regular humidity gauge somewhere else in my terrarium just to be a gut check for the digital one. Looks like you have the same digital one I have. Zoo Med HydroThrem If so mine has been very accurate.

[Manwell]

Take no notice of my (internal) red heat lamp it needs to be moved outside the tank in case my little man jumps and burns himself, it's just a temporary measure to get the heat up - I ordered a compact light canopy that will sit ontop of the tank with fitted blue/red heat

[reptifrog]

cheers paul, that temp/humidity gauage is exo terra. by the way the middle as in dangling from the top of the mesh at the same level as it now in the pic or as in at the back middle at the same level as the pic, and manwell why dont you get a mesh guard?

[DigitalPunk]

On the glass in the middle. Sorry I was less than clear in my previous post. Think of it as trying to find a spot that will give you the best idea of what the temp/humidity is in the tank. For instance I placed mine in the middle on the side that is not directly under the Ceramic heater. This way for the temp I know if it is 78 degrees on that side than the other side directly under the lap is a bit warmer. This helps me ensure the whole terrarium is within range of what the frogs like as well as gives them a side that will be warmer if they decide the heat is where it is at.

Same thing for humidity. I placed it midway on the tank in a place the misting system won't get water directly on it. This would cause errors and false readings. Helps ensure the humidity in the middle of the terrarium is right. Which should mean the humidity at the top is a bit less, but a bit higher on the ground.

Here is a picture of the terrarium (this is after a rush cleaning that HAD to be done. and has prompted a total redesign of the terrarium that is still currently underway. I am just sharing it to give you an idea of where I placed my sensor.

Also i use a ceramic heater so I can maintain temps at night without shining a light directly into the terrarium.

[reptifrog]

once im home il add a photo or 2 of the sensor in the new location twll me what you think, that a red eye tree frog you have?