Page 1 of 2 12 LastLast
Results 1 to 20 of 31

Thread: Heat

  1. #1

    Default Heat

    I am afraid i am not providing enough heat for my frog. My strip thermometer has stopped working and it feels cold in there. I use a 13 watt UVB to heat the tank. I also have a 75 watt basking UVB bulb and a 60 watt daylight UVB bulb with me. Do they even require UVB? I'd not, can I just use a regular lightbulb that i can find in my house? Although i think it is cold, he is always burrowing to the bottom at the point that i can see him.

  2. # ADS
    Circuit advertisement
    Join Date
    Always
    Posts
    Many
     

  3. #2
    redeyedtreefrog123451
    Guest

    Default Re: Heat

    What kind of frog

  4. #3

    Default Heat

    Cranwelli

  5. #4

    Default

    Yes for day you can use a regular low wattage lightbulb. Just make sure there is shade underneath.

  6. #5
    Hypnotic
    Guest

    Default Re: Heat

    I use heatmats for all frogs, currently I had to mix and match to get my 2 froglets at 27.9, I actually had to use an entire heat cable + 1 heatmat on each side to reach that temperature.
    Pacman frogs do not require UVB, I currently use led lights aimed at an angle, so part of the enclosure is bright and some of it shaded.

  7. #6

    Default Heat

    My heat pad is not working and my only sources of heat i have are lights. Also I don't want to risk my pacman burning by staying next to the wall all the time. (Heat pad on the side)

  8. #7

    Default

    is the heat mat above the substrate on the side?

  9. #8

    Default Heat

    I don't have one, that was just a scenario, it happened to my tree frogs.

  10. #9
    Hypnotic
    Guest

    Default Re: Heat

    I'm not really worried about that, I have cork back and side panels, the heat spreads quite nicely among them, my temperature probe is attached to the corner between the mat and cable and touches the wall where they both cross, so that should be the hottest point and that reads 28.5 right now.
    If your worried about burning, just hang the heatmat a few cm above the substrate, so the pacman can't directly touch it.

  11. #10

    Default

    I'm no tree frog guy, but wouldn't an uth be better underneath for tree frogs since heat travels up? Anyways using just lights for heat is fine. I've been thinking about getting a heat cable though. Gotta do my research first.

  12. #11

    Default Heat

    Well I was seven years old when I had my tree frogs, i wouldn't know better

  13. #12

    Default Heat

    I just changed the lift and my pacman is showing odd behavior, he is jumping across the side if the enclosure back and fourth.

  14. #13

    Default

    Like tryin g to get out?

  15. #14

    Default Heat

    I'm not sure, but I think he is comfortable now. He did not start burrowing yet, but he is sitting under some foliage.

  16. #15

    Default

    Lift or light?

  17. #16

    Default Heat

    Light

  18. #17

    Default

    What wattage is the new light?

  19. #18

    Default Heat

    It says 60 uses 13

  20. #19

    Default

    Might be a bit too much. I'm using a 40 with a dimmer. He has shade right?

  21. #20

    Default Heat

    It doesn't feel all that hot

Page 1 of 2 12 LastLast

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. To heat or not to heat. . .the water.
    By Bodeman in forum African Bullfrogs
    Replies: 7
    Last Post: April 29th, 2013, 02:14 PM
  2. Heat mat problem
    By guilletto in forum Vivarium, Terrarium & Enclosure Discussion
    Replies: 6
    Last Post: April 21st, 2013, 01:53 AM
  3. heat for dubia
    By MonsterPyxie in forum Food, Feeders, Live, Frozen, Culturing, etc
    Replies: 4
    Last Post: September 7th, 2011, 08:42 AM
  4. Heat Tape
    By demeteraurion in forum Pacman Frogs
    Replies: 1
    Last Post: July 13th, 2011, 06:32 PM
  5. Heat
    By Immortal in forum Vivarium, Terrarium & Enclosure Discussion
    Replies: 21
    Last Post: May 8th, 2011, 05:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •