Tell me what you think

[WhitesTreeFrog]

heres a idea i had today. this would be made out of 3/4 inch plywood. the top part is two seprate 12x12x24. the divider seperates it into these demensions. i would keep a tree frog in each side with great stuff backgrounds and sides. the bottom is a 24x12x12 and i would keep one pacman frog down there with a heatpad on the back. on the back their is a power strip mounted.

[Adam R]

light for the bottom tank?

[WhitesTreeFrog]

light for the bottom tank?

Led strip


Sent from my iPhone using Tapatalk

[IAmBored]

It looks great but just wondering how you gonna make the doors , since you have to put some substrate at the bottom of the tank , and with these kind of doors every time you open it , the substrate will leak out or fall on the floor.

[Benedicta]

I dunno bout the plywood though...i'm a bit unsure for it as there's quite a fair bit of moisture runnin through the whole area...more afraid of the plywood giving way and breaking everything if its a bit on the heavy side...
It would look more stable if the bottom tank section was at the top with the cabinet bones to support the weight...
I dunno...just my point of view and i might be wrong...

[WhitesTreeFrog]

I dunno bout the plywood though...i'm a bit unsure for it as there's quite a fair bit of moisture runnin through the whole area...more afraid of the plywood giving way and breaking everything if its a bit on the heavy side...
It would look more stable if the bottom tank section was at the top with the cabinet bones to support the weight...
I dunno...just my point of view and i might be wrong...

Actually the way I would make it with supports and metal crowbar on the top I wouldn't have to worry. Another good thing is my father is a carpenter


Sent from my iPhone using Tapatalk