Please help me with cracking tank

[deranged chipmunk]

Judging from all the condensation on the top, i would definitely agree with heather, heat from the lamp combined with cool condensation cracked the tank. Hopefully you can find a replacement on craigslist cheap.

[UncleChester]

Ugh, that looks like a nasty. I think the only way to salvage this tank without making it look like a complete mess would be to remove the top piece of glass if you can. Silicone comes off fairly easy with a razor. The tricky part would be removing it from the frame without damaging the frame. Replace with window screening or if you need it to be really sturdy use perforated stainless steel (more expensive and commonly found at custom auto shops, I use this as I have cats who like to sit on my tanks).

I have had success in stopping cracks like this from spreading by smearing silicone along the crack on both sides. I've done this for glass on cold frames out in the garden and they've held together since. It looks really ugly though, and is no guarantee against further breakage. You could also get a piece of glass cut, smear it with silicone and apply the whole thing to the top of your tank like a big bandaid. This would be even uglier, but sturdier.

Was your light sitting directly on the tank or was there some airflow between it and the glass? What wattage was it?

[deranged chipmunk]

You could use a high temp soldering iron to melt the plastic frame flush so that you can remove the glass. If you still have the old tank that cracked, you could do the same and use the good pane of glass as a replacement. Another option would be removing the good pane from the old tank and siliconing it on top as brian suggested. Ugly, but effective. Home depot also sells those diy screen fame kits. All you need is a hacksaw, time and determination. I have used those kits in my house several times. They work really well.

[Kellbri]

My husband is thinking that we could use a dremel tool and cut the glass out and put a screen on the top. As far as the screen strength i'm not to worried about that my cat doesn't care about the frogs and my shorthair gaurds the tanks, he loves the frog. It's really funny cause he sits in front of the tank and wines when she is active until i bring her out for him to look at.

[Kellbri]

As far as the condensation it probably was, i just didn't think the uvb balb was hot enough to crack it.

[UncleChester]

I'd be wary of cutting it with a dremel. While I believe they do have a diamond cutting wheel that should do the trick, it will send tiny glass dust everywhere and would be impossible to clean out of your vivarium without gutting it, and if you're going to gut it you might as well just take the broken glass clean off.

[deranged chipmunk]

I think she may mean cutting the plastic rim with a dremel. As far as i know, there aren't any glass cutting tools for 1/8" chuck die grinders. At least not in any of my "big name" tool catalogs.

[UncleChester]

I think she may mean cutting the plastic rim with a dremel. As far as i know, there aren't any glass cutting tools for 1/8" chuck die grinders. At least not in any of my "big name" tool catalogs.

Dremel 545 Diamond Wheel - Amazon.com it's made for hard materials. They don't list glass as a use, but you can find people on the web that have used it with success. It would be a long, labourous, and messy process here.

Cutting the plastic with a dremel to get at the glass would be fine though.

[deranged chipmunk]

Oh, you meant those wheels. I know them, they are for cutting ceramic tile. Probably why i didn't think of it. I would never use it on glass. I know some people do, but like you said, it would be a mess. Ugh!!!