help with background please

[arielgasca420]

decided to use gorilla glue from reading other forums saying to use the kind that dries white. does anyone know anymore product information on this white glue?
the only thing I have found is gorilla glue 5201204 glue dries white. just want to double check before I buy it

[DonLisk]

When you did the background how long did you allow the Great Stuff to cure before adding the silicone on top and then putting your soil to the silicone.

Gorilla Glue dries permanent and if you make mistakes it is not going to come off I believe. It is also almost impossible to sculpt it once dry but anything it touchs such as your hands, accents, glass, is not going to be easy to remove if accidents occur while applying it.

As for smell, the GE Silicone 1 product needs to air our for quite some time since the smell sticks around for a week but GE Silicone II usually has the smell mostly gone after about 4 days with good air circulation.

Great Stuff should be allowed to dry completely so if you put it on really thick it will take more than a few days to completely dry inside the deeper sections. I puncture holes to help with drying and allow for the still expanding areas to release anything trapped under the already cured top skin.


If attaching bricks (sounds heavy) a glue gun isn't a good idea since it separates from Plexi and glass fairly easily.
100 Percent silicone is good as would be the Gorilla Glue, or even a little bit of the Great Stuff can be used to attach the accent items.


Take your time, give things time to dry and air out, before moving on to the next process when applying anything that has to cure.

[arielgasca420]

Thanks for your reply don, i did want to clarify a few things though. I let the great stuff sit in my garage for 6 days before adding silicone and let the silicone sit for 3 days(opened the garage a bit) I did use a small amout of acrylic paint to touch up some spots that i missed and i have a feeling that is where the smell came from. I thougt the brand was VOC free but i will double check the can. I will most likely get some more silicone and silicone over the places i used the paint.
As for the bricks i need something for them to adhere to one another and then attach the bricks to the glass with silicone.
I do not want to trash my first background because i spent a lot of time on it. Its possible that i can still use it in my bearded dragon cage. Is there a safe brown colored silicone i can use?
Thanks for your help

[arielgasca420]

I almost forgot to mention i put the soil on as i applied the silicone. I did it section by section. The silicone was so hard to get into all the cracks so i had some yellow spots showing through when i was done. I probably should have used two bottles of silicone

[arielgasca420]

So I have been looking around for brown silicone and I have come across the following item. I would like to know if it is safe
GE Silicone II Brown Silicone for Window and Door Caulk
I understand there is brown pond sealer but that stuff is a little too expensive for one small project. I would be more favorable to buy it if I had a few several projects to use it on.

[DonLisk]

GE Silicone II should be available in brown but I buy the black version. Just make sure its the Window and Door version.
I think a dab of Great stuff between the bricks will keep them together. Or Gorilla glue will also and be a permanent bond for the bricks.


When putting soil to the silicone, make sure the soil is dried out and the silicone is put on thick. I cut line and cracks way over sized since the thick layer of silicone will really fill it in.

[arielgasca420]

Thanks for your help donlisk. I applied brown silioneII windows and doors to try and save the current background. It was very difficult to apply because there was soil currently on the background so it balled up. Ill let it dry in the sun for 72 hours, shake off the extra soil and see if the smell is still there.