Water Proofing Background Options

[J Teezy]

if you definite waterproof you should use silicone in my opinion. If you already have shields all i would seal with that as well before the silicone. There are many ways to combat the shine. One is to sprinkle sand on silicone while its curing. I have done this before and it works good. I made a rock wall in my 10 gallon vert where i did this. Check my pictures in signature.

If you have never sealed with shields or silicone before the shine is really not that bad. In fact on my 29 gallon which i used shields and silicone i skipped the sand step because the "shine" the silicone gives off makes the background look like its wet sort of, and my vivs get misted pretty well and are wet alot anyway. So its more of a wet look than a shine in my opinion, plus the plants hide the majority of the background anyway so its really not that noticeable

[ndame88]

Thanks Josh, No I have not purchased anything yet, so if I understand you correctly, if you use silicone you dont have to seal the grout? Now for a stupid question, by adding sand to the silicone, I would think that would be rough on the frogs skin?

[J Teezy]

if you want to be extra safe you could seal the grout with shields > then paint > then seal with shields again (couple coats) > then silicone

I have not noticed any issues with the frogs and the sand. You don't put a lot on it you just sprinkle it to break up the shine. I used black sand (the arts and crafts type stuff, from hobby lobby).

Check this out, this is where i got my techniques from mostly Lizard care, and fake rock wall landscapes I used his waterfall build as a learning guide to grouting and sealing and such