First attempt at building a fake background.

[DonLisk]

na, you can get pretty studry plexi or acrylic and the thicker the stiffer. Also the clearer the more expensive.

Before I forget, don't cut the door until you have installed the bottom section of glass and top and bottom screens. You just never know if your frames are slightly larger or smaller until make and installed.

Here is a great pic of how someone did the screens. Oh, I would do 1 1/2 inch at bottom and at least 4 inch of screen at top.
Bottom glass maybe 4 inches high.

[DonLisk]

Having the screen at the bottom help in airflow but also will help in reducing the humidity since the more closed the more humidity is retained. The ones pictured in my pics keep about 90 percent which would be to much for tree frogs.

[thadmy]

Yeah that's why I figured doing a screen at the bottom and at the top. So your saying I should do roughly 2 inch screen at the bottom and like 4 at the top

[DonLisk]

Yeah that's why I figured doing a screen at the bottom and at the top. So your saying I should do roughly 2 inch screen at the bottom and like 4 at the top

Yes. Air flows in and out easier and if ever needed, a fan can be aimed at the top or bottom to cool or create more airflow.

[thadmy]

After a night of drying its time to cover the walls.

[DonLisk]

Nice. If you have not began putting the silicone to it you can cut in some ledges and overhangs with a sharp knife. I cut in crevasses, ledges and such pretty dramatically since the silicone fills them in fast and they end up covered mostly if not exaggerated. I also like to cut out under some locations I made for plants on occasion.

Doing this gives more depth and less interior space taken up by all the GS.

[thadmy]

I did cut out some crevasses that I'm going to put some pond stones in to make it look like a cliff, but I was wondering what the best way and thing to use for a water dish and also should I use a feeding dish for my clowns or will they not use it.