Rockwall Paludarium Build Log. Pic Heavy

[DiggenEm]

Just a real quick update....

Got around to applying spaghnum peat moss and Titebond III to the rest of the bg. I started off by saturating the peat with water and then mixed in the Titebond until it was the consistency of cake batter. I then spread it over the foam. Unlike the silicone method there is no need to rush this because it takes a long, long time to dry. After I had the foam completely covered I pressed the dry peat in straight out the bag and packed it down. Here are the pics....
Attachment 18865



I know the photos are crappy.

[xeonic]

First off I wanted to compliment you on your work. Very well done. I have one question though. Is the quikrete and titebond III going to release toxins into your water?

[DiggenEm]

First off I wanted to compliment you on your work. Very well done. I have one question though. Is the quikrete and titebond III going to release toxins into your water?

Thanks for the compliment. To answer the question no, once properly cured they both are safe. Quikrete has to repeated soaked and rinsed for a few weeks to neutralize its ph. This process can be expedited using vinegar or a mild acid. Some zoo exhibits and aquarium keepers actually use cement based products for their enclosures. The Titebond once dry is FDA approved for indirect food contact once cured, it just have to dry throughly which takes a couple of weeks. Ive used Titebond II which is weather proof not water proof, and I never had any problems with it breaking down or leeching so I figure Titebond III will hold up even better since there is a portion of it that would be submerged.

[xeonic]

Very Nice, I have been researching different methods of building backgrounds. I have used the spay foam method already on a large tank which worked alright, kept the tank nice a lite. I didn't like the idea of the clay method as it never fully dries, and isn't good for ponds. Have you finished your Vivarium? Could you upload some pictures for all to admire?

[DiggenEm]

Very Nice, I have been researching different methods of building backgrounds. I have used the spay foam method already on a large tank which worked alright, kept the tank nice a lite. I didn't like the idea of the clay method as it never fully dries, and isn't good for ponds. Have you finished your Vivarium? Could you upload some pictures for all to admire?

No I wish I was finished. Ive been uploading as I go. I lost my job a few months back so I had to take this build relatively slow. I think its for the better though because I get to brainstorm a lot before I commit. I actually landed a temp gig that I start today so hopefully that will give me some extra cash to get this thing done. I dont plan on getting any major fauna until the spring but I want it planted and up and running by Dec.

As far as builds go I have used the peat and silicone method, and the titebond method but working with cement is by far my favorite. It's fairly inexpensive and you really can add that extra dimension that you cant achieve with GS.

[Badger]

Awesome tanks, looks amazing so far. keep us posted. Economy sucks, everyone is losing their jobs.

[optimum]

any updates ?