10 gallon vertical test build

Good start I went the styrofoam route too, I then covered it with GS and it turned out GREAT our atleast I think so for a first try haha.

Looking forward to this build.
Good luck

Remember to seal the front lower INSIDE around what use to be the top plastic. Although you are putting in a front lower glass or plexi piece, the original top is not sealed on the inside from leaking.

i think i'm going to use more styroform to make my rocks. Just found a guy in my cities fish club who is going to drill my tank for me, so as soon as he is available to do it will be getting that done so i can then set the FB in place so I can cut the background to its final length and get started.

One problem I'm having atm is finding some safe silicon to use. People are saying don't use anything that is for bathrooms, kitches, etc. Home Depot has GE Silicon I and II and DAP brand stuff but i'm not sure if its safe to use or not, the label doesn't really give much information about any stuff that's in it that could be an issue

Shop GE 9.8 Oz. White Silicone at Lowes.com

Most outside door and window by GE doesn't have anti-mildew in it. That is the stuff I used and I haven't had a problem

Ok, i'll probably grab a tube of that then, getting the tank drilled tomorrow morning so should be able to get cracking this weekend

Yeah and I have mold growing in my tank so it must be an ok brand haha.... I figure if molds growing I'm in the clear

well started messing around with the background. Not sure how i feel about it at the moment

I think it looks good so far!

Most use the GE Silicone II version anymore since the smells disappear faster than the GE Silicone I
and as stated: Outdoor window and door versions.

only GE Silicon II i saw was Kitchen, bath, Plumbing kind.

Little more puzzle playing on the background. Looks ok in raw state i guess

glass drilled and drain assembly complete

Siliconed the inside rim of the tank

Siliconed the styrofoam to the backing.

Next step will be quikreteing the rockwall

Picture of the drain assembly (tank is upside down in the picture so that i could attach the drain assembly temporarly



Put the background in to see how tight it fit. Going have to shave one of the sides down a tiny bit so that its not so snug. I want to try and make it so I don't have to silicone it in but we'll see.

decided that i want to be able to get to the bulkhead strainer (should be coming in the mail in the next couple days) if I needed to, for some odd reason it gets clogged, so I made an access hole




And a cover for it which along with the rest of the eggcrate will have window screen over it

did the first coat of quikrete today. Wasn't very happy with the process because the quikrete i had was not mixing well, after mixing it up it would quickly seperate from the water (the mortar would go to the bottom of my bowl and the water on top), so i was constantly stiring it up, getting some on my brush, applying, stirring, dipping, applying, etc. Going to try unsanded tile grout tomorrow for the next layer

found a couple of frogs

Oh yeah Rockband haha

Haven't played that in a long time, Battlefied 3 is all i really play, but back to frogs


The quikrete layer i put down didn't adhere very well it was flaking off pretty easy, so i took a paintbrushed and brushed the majority of it off and then applied unsanded grout. The grout went on easier so hopefully it will adhere better than the quikrete did

2nd coat of unsanded grout applied

3rd and final coat of grout applied. I liked the grout way better than quikrete. Way easier to work with in my opinion. False floor is just about done, needs to be screened. Will be doing the acrylic paint work this weekend

Pictures are rough pics. Background will be pushed all the way to the top of the tank and most likely siliconed in unless i can find a way to hold it there without having to silicone it. I'd rather make it easily removable if possible

With access panel removed



access panel on